Optional Accessories of Tapping Machine Broken Tap Remover

Optional Accessories

Broken Tap Remover

LS-100

Country of Origin: Taiwan

APPLICATION

  • Suitable for removal of Various Hardened material such as Broken screws, Taps, Drill bits, Gauges..etc. lncluding Other Cutting tools and tools.
  • Can Work on Different sizes, Diameters and Shapes of Workpiece.
  • A Versatile High Efficiency, Low cost Operation.


Features for LS-100:

  • Utilising Spark Erosion method to remove Broken parts of Cutting tools Or Screws, No damage to Workpiece, Due to cutting force generated.
  • It is of Portable design and lts Magnetic base, Allows to be easily clamped on Top of Workpiece for Machining.
  • It’s a Self-Contained unit, Complete with Dielectric Pump and Central cooling for Electrode Holder.
  • The workhead is Mounted on a +/- 60 Degree angle Slide plate.
  • With simple Easy-to-understand Operating panel on Controller.
  • With Automatic cutting depth control. Maximum Z-axis depth setting : 100mm. and Z-axis up / down Max. Travel : 300mm.

Specification

Model unit LS-100
Electrode diameter Range mm ψ1.2 - ψ6.0
Machine Unit Net weight kgs 6
Machine dimensions (W x D x H) mm 240 x 60 x 410
Generator Unit Net weight kgs 30
Generator dimension (W x D x H) mm 310 x 260 x 200
Generator Power lnput 220 Volt. 1-Phase, ( 50 / 60 Hz.) / 110 Volt. 1-Phase, ( 50 / 60 Hz. )
Maximum Current Output Amp. 10 A.
Total AC Power lnput KVA 1.2 KVA
Dielectric Fluid Clean Water
Electrode Material Brass Bar & Sheet
Packing Dimension (Carton packing) mm 520 L x 440 W x 270 H
Total Weight (Carton Packing) kgs 40
Wooden Crate Packing Dimension mm 590 L x 515 W x 400 H
Wooden Crate Packing Weight kgs 50

TYPICAL WORK TIMES

TAP DIA. DEPTH ELECTRODE DIA. TIME
M6 10mm ψ3 7 min
M8 10mm ψ4 9 min
M10 10mm ψ5 13 min
M12 10mm ψ6 16 min

STANDARD ACCESS.

  • MACHINE UNIT With Magnetic Base.
  • GENERATOR UNIT.
  • SMALL PUMP UNIT FOR Dielectric Fluid.
  • ELECTRODE CHUCK.
  • BRASS ELECTRODE. (SIZE AS BELOW)
    • ψ1.2mm DIA. X 4 Pieces
    • ψ2.0mm DIA . X 2 Pieces
    • ψ2.5mm DIA . X 2 Pieces
    • ψ3.0mm DIA . X 2 Pieces
    • ψ4.0mm DIA . X 1 Piece
    • ψ5.0mm DIA . X 1 Piece
    • ψ6.0mm DIA . X 1 Piece
  • BRASS SHEET & FIXED HOLDER. X 1 Set.

Cutting Method

Cutting Method

Overall Dimension

Swivel Work Head

MENU